To provide you with reliable and efficient service Tundra has a fleet of units capable of undertaking your geotechnical drilling projects.
Drill Unit
CME 850 (Rig #214) Geotechnical Tracked Drill
- Length – 18′ (5.5M)
- Width – 8’2″ (2.5M)
- Height – 9’35” (2.85M) mast down; 27’3″ (8.3M) mast up
- Weight without tooling 25,441 lbs (11,540 kg)
- 2.9 PSI Ground Pressure
- 28,275 lbs (12,825 kg) of pull back force
- 18,650 lbs (8,460 kg) of push down force
- 15,000 lbs (6,804 kg) of rotary torque for deep auger holes
- 700 RPM for Core Drilling Applications
- 4 winch lines capable of hanging 20′ of tooling per winch
- Angle Drilling Capabilities
- Solid and Hollow Stem Auger
- Air and Mud Rotary
- HQ3 Coring
- ODEX Capabilities
- SPT Hammer
- 3L8 Monyo Pump
Drill Unit
CME 750 (Rig #217) Geotechnical Rubber Tired ATV Mounted Drill
- Length – 28′ (8.5M)
- Width – 8′ 4″ (2.5M)
- Height – 9′ (2.7M) mast down; 29′ 6″ (9M) mast extended
- Weight – 23,000 (10433 kg) lbs
- 10.5 PSI Ground Pressure
- 30,000 lbs (13608 kg) of pull back force
- 20,000 lbs (9072 kg) of push down force
- 10,230 lbs (4640 kg) of Rotary Torque
- 700 RPM
- Carrier Speeds of 30km/hr – highly mobile
- 4×4 Drive with tire chains
- Rubber floatation tires – minimal environmental footprint
- 4 winch lines capable of hanging 25′ of tooling per winch
- Solid and Hollow Stem Auger
- Air and Mud Rotary
- Coring
- ODEX capabilities
- SPT Hammer
- Bean Pump capable of 600 PSI
Drill Unit
CME 55 (Rig #216) Track Mounted Drill
- Length – 25′ (6.2M)
- Width – 8′ 2″ (2.49M)
- Height – 27′ 11″ (8.5M) with mast extended
- 28,275 lbs (12825 kg) of pull back force
- 18,650 lbs (8456 kg) of push down force
- 7700 lbs (3493 kg) of Rotary Torque
- Solid stem, Hollow Stem Augering
- Air Rotary, Laskey and ODEX capabilities
- SPT Hammer
- 4 Winch lines capable of hanging 20′ of tooling per winch
