Equipment:
To provide you with a reliable and efficient service Tundra has a fleet of drill units with the capability to undertake geotechnical / environmental drilling projects.
Prior to the commencement of any project, our experienced crew will work with you to determine the complexities of the site and any other specific needs and requirements you or your clients may have. By taking the time to qualify and understand each job before hand we can ensure that the correct equipment is specified to successfully complete your project in the most efficient and cost effective way
Drill Units:
CME 850 (Rig #214) Geotechnical Tracked Drill
- Length - 18' (5.5M)
- Width - 8'2" (2.5M)
- Height - 9'35" (2.85M) mast down; 27'3" (8.3M) mast up
- Weight without tooling 25,441 lbs (11,540 kg)
- 2.9 PSI Ground Pressure
- 28,275 lbs (12,825 kg) of pull back force
- 18,650 lbs (8,460 kg) of push down force
- 15,000 lbs (6,804 kg) of rotary torque for deep auger holes
- 700 RPM for Core Drilling Applications
- 4 winch lines capable of hanging 20' of tooling per winch
- Angle Drilling Capabilities
- Solid and Hollow Stem Auger
- Air and Mud Rotary
- HQ3 Coring
- ODEX Capabilities
- SPT Hammer
- 3L8 Monyo Pump
CME 750 (Rig #217) Geo-technical Rubber Tired ATV Mounted Drill
- Length - 28' (8.5M)
- Width - 8' 4" (2.5M)
- Height - 9' (2.7M) mast down; 29' 6" (9M) mast extended
- Weight - 23,000 (10433 kg) lbs
- 10.5 PSI Ground Pressure
- 30,000 lbs (13608 kg) of pull back force
- 20,000 lbs (9072 kg) of push down force
- 10,230 lbs (4640 kg) of Rotary Torque
- 700 RPM
- Carrier Speeds of 30km/hr - highly mobile
- 4x4 Drive with tire chains
- Rubber floatation tires - minimal environmental footprint
- 4 winch lines capable of hanging 25' of tooling per winch
- Solid and Hollow Stem Auger
- Air and Mud Rotary
- Coring
- ODEX capabilities
- SPT Hammer
- Bean Pump capable of 600 PSI
CME 55 (Rig #216) Track Mounted Drill (New Rig)
- Length - 25' (6.2M)
- Width - 8' 2" (2.49M)
- Height - 27' 11" (8.5M) with mast extended
- 28,275 lbs (12825 kg) of pull back force
- 18,650 lbs (8456 kg) of push down force
- 7700 lbs (3493 kg) of Rotary Torque
- Solid stem, Hollow Stem Augering
- Air Rotary, Laskey and ODEX capabilities
- SPT Hammer
- 4 Winch lines capable of hanging 20' of tooling per winch
Morooka (Rig # 019) Track Mounted Environmental Drill
- Length - 19' 7" (5.97M)
- Width - 8' 6" (2.59M)
- Height - 18' (5.5M) mast down; 26' 3" (8.0M) with mast extended
- Mast Stroke - 11' (3.3M)
- 4.3 PSI Ground pressure
- 42,000 lbs (19051 kg) of pull back force
- Rubber tracked
- Solid and Hollow Stem up to 20M dependant on soil conditions
- Large deck for material storage
AMS (Rig # 209) Environmental Power Probe
- Length - 16' 3" (4.95M)
- Width - 8' 2" (2.44M)
- Height - 9' 2" (2.8M0 mast down; 14' 10" (4.5M) mast extended
- Mast Stroke - 80” (2.05M)
- 48,000 lbs (21772 kg) of pull back force
- 34,000 lbs (15422 kg) of push down force
- Solid and Hollow Stem Augering up to 20M dependant on soil conditions
- Adjustable mast for angled probing & drilling
- 550 ft-lb S-22 hydraulic hammer with 1800 BPM
- 5000 ft-lb Hydraulic 2-speed auger motor
- Geo-probe DT325 tooling to produce a 2" core sample
